Baaske Medical USB 1.1 Isolator up to 4kV

The Baaske USB 1.1 Isolator MED is designed to meet UL60601 specification*, isolates up to 4kV - strong enough for hospital and medical use. Protect expensive PCs and equipment from damaging electrical storms, power surges and other high EMI/RFI disturbances. This isolation barrier eliminates ground loops which are disruptive in measurement applications. No configuration or software installation required.

At just 2.0 x 1.7 x 0.8 inches, these little isolators pack a powerful punch against electrical noises, surges and spikes – up to 4kV isolation. When lighted, the power LED indicates that the device is powered and ready to be used. The USB Isolator receives power directly from the host PC or hub. The isolator must be connected to a full power (500 mA) USB port.
The isolator will work with USB 1.1 or 2.0 ports but has fixed USB data rates of Full Speed (12 Mbps), and Low Speed (1.5 Mbps). Standard USB cables of up to 5 meters may be used on either side of the USB Isolator. The USB isolator is transparent to the host operating system and does not require configuration or software installation.
The isolators are USB bus powered and can provide up to 100mA of current to the attached downstream device. This is possible when the isolator is connected to a high power USB host port.

Included Items:

• USB to USB Isolator
• USB Cable (~1 Meter)
• Quick Start Guide