Phidget Linear Touch (1015)
Part Number: 1015
The Phidget Linear Touch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact.
The 1015 can be mounted behind a sheet of glass or plastic; The recommended thickness is 1/8 inch. Use Silicon adhesive when attaching the Phidget to the material; standing the PhidgetLinearTouch off or creating space between the separation material and the Phidget can cause false-triggering to occur. Materials thicker than 1/8 inch may work, but will require a larger surface area of contact to ensure proper triggering (i.e.: two fingers instead of one).
Sliding a finger along the touch sensor varies the Analog Input 0 value from 0 to 1000 in approximately 125 discrete steps. When the finger is removed, the final measured value is retained. Two Digital Inputs are used to convey additional information: Digital Input 0 is True when contact is made with the Phidget, and Digital Input 1 is True when a finger or object comes in close proximity to the board. The Analog Input value is valid when both Digital Inputs are true.
Product Features:
- Works through 1/8 inch of glass of plastic
- Recognizes both contact and proximity; can be used as a slider or as an array of buttons
- Connects directly to a computers USB port
Comes packaged with:
- A 120cm Custom USB Cable
- A mounting hardware kit
Additional Links:
Product Manual
Programming Resources
Phidget Linear Touch (1015)
|