Phidgets Interface Kit 8/8/8 w/6 Port Hub (1019)

Part Number: 1019

Phidgets Interface Kit provides 8 Analog Inputs, 8 Digital Inputs with hardware noise filtering, 8 Digital Outputs, On-Board powered 6-port full-speed (12 Mbit/s) USB hub.

Product Features:

8 Analog Inputs
8 Digital Inputs with hardware noise filtering
8 Digital Outputs
On-board powered 6-port full-speed (12Mbit/s) USB hub

Analog Inputs
The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor.
Sampling rates can be set at 1ms, 2ms, 4ms, 8ms and multiple of 8ms up to 1000ms.

Digital Inputs
The Digital Inputs have a Digital Input Hardware Filter to eliminate false triggering from electrical noise. They can be used to convey the state of devices such as push buttons, limit switches, relays, and logic levels.

Digital Outputs
The Digital Outputs can be used to drive LEDs, solid state relays (such as the 3052 SSR Relay Board), transistors; in fact, anything that will accept a CMOS signal.

USB Hub
Connecting additional USB devices to the 1019 is as easy as plugging them into the on-board 6-port hub. Each USB port on the hub has a maximum current supply of 500mA.

Product Specifications:

Analog Input Impedance: 900k ohms
Digital Output Series Resistance: 300 ohms
Digital Input Pull-Up Resistance: 15K ohms
Analog Input Update Rate: ~1000 samples/second
Digital Output Update Rate: ~125 samples/second
Digital Input Update Rate: ~125 samples/second
Digital Input Recommended Wire Size: 16 - 26 AWG
Digital Output Recommended Wire Size: 16 - 26 AWG
Digital Input Wire Stripping: 5-6mm strip
USB-Power Current Consumption: Max 10mA
Min Power Supply Voltage: 6V
Max Power Supply Voltage: 15V
Power Jack Dimensions: 5.5x2.1mm
Power Jack Polarity: Center Positive
Current Available per USB Port: Max 500mA
Power Throughput (including 8/8/8): Max 20W
Analog Input Voltage Range: 0 to 5V
Digital Input Maximum Voltage: ±15V
Digital Output Voltage Range: 0 to 5V
Operating Temperature: 0 - 70°C

Comes Packaged With:

A Power Supply 12VDC 2.0A – with a US, Australian, European, or UK Plug
A 3001 - 180cm USB Cable
A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)

Additional Links:
Product Manual
Mechanical Drawings
Download 3D Step File
Programming Resources