Phidgets Stepper Bipolar HC (1067)

Part Number: 1067
The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor.
The 1067 can be used in applications that require very precise positioning; This is also the product you want to use to control larger industrial steppers or for applications that need a lot of torque.

This board is USB isolated, protecting your system from ground loops, and comes with a built-in replacable ATP Blade Terminal fuse to protect against an over-current scenario.

Product Features:

Controls the position, velocity, and acceleration of 1 bipolar stepper motor.
Provides very precise positioning.
Board is isolated from USB to prevent ground loops.
On-board fuse protects board from over-current conditions.
Connects directly to a computer’s USB port.
Requires an external 10 to 30VDC power supply

Comes Packaged with:

A 3018 - Mini-USB Cable 180cm
A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)
A 5 Amp ATP Blade Terminal fuse

Specifications: Controller Properties

Motor Type: Bipolar Stepper
Number of Motor Ports: 1
Motor Position Resolution: 1/16 Step (40-Bit Signed)
Position Max: +- 1E+15 1/16 Steps
Stepper Velocity Resolution: 1 1/16 Steps/sec
Stepper Velocity Max: 250000 1/16 Steps/sec^2
Stepper Acceleration Resolution: 1/16 Steps/sec^2
Stepper Acceleration Min: 2 1/16 Steps/sec^2
Stepper Acceleration Max: 1E+07 1/16 Steps/sec^2

Electrical Properties:

Available Current per Coil Max: 4 A
Supply Voltage Min: 10 V DC
Supply Voltage Max: 30 V DC
Current Consumption Min: 25 mA
USB Speed: Full Speed

Physical Properties:

Power Jack: 5.5 x 2.1mm Center Positive
Recommended Wire Size (Motor Terminal): 12 to 26 AWG
Recommended Wire Size (Power Terminal): 12 to 26 AWG
Operating Temperature Min: -20 C
Operating Temperature Max: 85 C

Additional Links:
User Guide
Stepper Motor and Controller Primer
Motor Selection Guide
Download 3D Step File