Opticis DVI Extension Module
Opticis Optical DVI Dual Link Extension Module (M1-2R2VI-DU) US$ 1399.00
The M1-2R2VI-DU is designed to be used with high resolution Dual link DVI source and large panel display, such as 30'' apple cinema display (2,560X1,600). It performs DDC/HDCP interconnection over CAT5 with R-J45 connector and transmits Dual link DVI graphic sources over four duplex LC patch cord up to 100m.
|
|
|
Fiber-only Detachable Module: M1-201-TR |
Opticis Fiber-only detachable Module: M1-201SA-TR US$ 675.00
M1-201SA is designed to install simply in sites passing through conduits by taking LC receptacle with the detachable cables, most popular in the fiber-optic communication market. For this purpose, the product adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data.
|
|
Point to Point Hybrid Cable: M1-1P0 |
|
Opticis DVI Point to Point Hybrid Cable 66ft: M1-1P0E-020 US$ 660.00
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesnt require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
|
|
Opticis DVI Point to Point Hybrid Cable 98ft: M1-1P0E-030 US$ 858.00
M1-1P0, is designed to adopt hybrid cables, embedded copper wires for DDC/HDCP interconnection and fibers for graphic data together in a jacket so that it offers the benefits of sturdy metallic and compact size connectors. For the simplicity of installation, it is utilized +5V DC power of graphic cards to drive both of its transmitting and receiving modules so that it doesnt require a external power adaptor. For just in case, however, its optional model to use an external power adaptor is available.
|
|
|
|
 |

Eye Diagram for Glass Optical Fiber 500m UXGA |
Fiber-optic interconnection of digital graphic data, complying
with DVI (Digital Visual Interface) enables data transmission of
high-quality and cost effectiveness of integrated display systems.
The DVI interface is a industry standard of digital graphic transmission
protocol, supervised by DDWG (Digital Display Working Group), supporting
TMDS (Transit Minimized Differential Signal) graphic transmission
and implementing DDC (Display Data Control) for CPU to identify displays.
It also applies for HDCP (High Definition Contents Protection) in
DTV system.
Opticis DVI products consist of a transmitter having 850nm VCSEL
array inside and a receiver having PIN-Photo Diode array inside.
They support UXGA (1,600x1,200) graphic resolution at 60Hz refresh
rate.
It can simply extend over the limits of copper wire extension without
any distribution amplifier or repeater. In addition, the products
could offer a benefit to make electrical separation between graphic
sources and display ends.
M1-100 point-to-point fiber cable implements DDC/HDCP interconnection
as well as 4 channel graphic data (Red, Green, Blue, Clock) into
fiber-optic technology, using 8 fibers cable.
M1-1P0 point-to-point hybrid cable is designed to transmit
graphic data over fiber, but interconnect DDC and DC power for the
transmitting and receiving modules over copper wires.
M1-201SA fiber detachable module adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data with self EDID programming feature.
M1-2R2-TR fiber/copper detachable module adopts RJ-45C UTP
cable for DDC/HDCP interconnection as well as two duplex LC patch
cord fibers to transmit the graphic data.
M1-2R2VI-DU fiber/copper detachable module adopts RJ-45C
UTP cable for DDC/HDCP interconnection as well as four duplex LC
patch cord fibers to transmit Dual DIV signal.
Applications Include:
- Digital display systems interconnection for medical, military,
aero, factory, and traffic control
- Digital FPDs, PDPs and projectors in conference room and auditorium
- Kiosk with digital FPDs
- Color LED signboards, FPDs and PDPs for information display
and stadiums
|